Home ›

ELITE SM LOADER

ELITE SM LOADER

Used in many applications including mill and scrap yards as well as waste transfer stations.

"R" Features / Configuration

1"R" Features / Configuration

  • Standard Equipment & Accessories
    • Electric junction box and a Danfoss (12 Volts) electric-over hydraulic proportional control valve assembly are factory installed at the base of the loader and protected by a hood.
    • Two electric joysticks and a safety cut-off switch are supplied to be dealer installed inside a remote operator station.
    • Two 50 feet electric cables to connect the joysticks to the Danfoss control valves are also supplied.
  • Optional Equipment
    • PU-40 Power unit includes a 40 hp electric motor, an electric panel, a cut-off switch, a double gear pump, a thermostatic oil cooler, a 44 US gallon oil tank, a support structure and hood.
    • 1000 watt anti-freeze immersed heater with thermostat on PU-40 oil tank.
    • Continuous rotation through a 12 port hydraulic swivel and a 5 section electric swivel.
    • 50 feet extension cable from joysticks to Danfoss control valve.
    • 50 feet extension cable for emergency cutoff switch and lights.
    • 40 feet extension cable to connect loader valves and accessories to PU-40.

"X" Features / Configuration

2"X" Features / Configuration

  • Standard Equipment & Accessories
    • PU-40 power unit includes a 40 hp electric motor, an electric panel, a cut-off switch, a double gear pump, a thermostatic oil cooler, a 44 US gallon oil tank, a support structure and hood, non continuous rotation limited to 345 degrees, an operator station mounted on the turret and including the operator seat, the hydraulic control valve assembly mounted under the operator's seat, 2 mechanical joysticks mounted on the valves and start/stop/accessories switches mounted close to the operator. The operator station is ready to receive an optional cab.
  • Optional Equipment
    • 1000 watt anti-freeze immersed heater with thermostat on PU-40 oil tank.
    • Continuous rotation through a high capacity sealed and insulated 4 section electric swivel.
    • Insulated cab (38" x 52") with wiper, fan, roof light and 2 lights towards the front.
    • 4000 watts electric heater with thermostat and fan.
    • Air conditioning.
    • Cab front windshield protective grid.
    • Radio AM/FM/CD.

"H" Features / Configuration

3"H" Features / Configuration

  • Standard Equipment & Accessories
    • An operator station mounted on the turret and including the operator seat, the hydraulic control valve assembly mounted under the operator's seat, 2 mechanical joysticks mounted on the valves. The operator station is ready to receive an optional cab.
  • Optional Equipment
    • PU-40 Power unit includes a 40 hp electric motor, an electric panel, a cut-off switch, a double gear pump, a thermostatic oil cooler, a 44 US gallon oil tank, a support structure and hood. A secondary start/stop/accessories control box installed in the operator station is also included.
    • 1000 watt anti-freeze immersed heater with thermostat on PU-40 oil tank.
    • Continuous rotation through an 8 port hydraulic swivel and a 5 section electric swivel.
    • Insulated cab (38" x 52") with wiper, fan, roof light and 2 lights towards the front.
    • 4000 watts electric heater with thermostat and fan (not available with continuous rotation option).
    • Air conditioning (not available with continuous rotation option).
    • Cab front windshield protective grid.
    • Radio AM/FM/CD.
    • 50 feet extension cable for PU-40 and loader without continuous rotation. Connects PU-40 to the loader to feed cab and loader electric accessories.
    • 50 feet extension cable for PU-40 and loader with continuous rotation option. Connects PU-40 to the loader to feed cab and loader electric accessories. Also includes wires connecting the start/stop buttons to the PU-40.

"SD" Features / Configuration

4"SD" Features / Configuration

  • Standard Equipment & Accessories
    • An operator station is supplied for dealer installation within 15 feet from the loader. It includes the operator seat, the hydraulic control valve assembly mounted under the operator's seat and 2 mechanical joysticks mounted on the valves.
  • Optional Equipment
    • PU-40 Power unit includes a 40 hp electric motor, an electric panel, a cut-off switch, a double gear pump, a thermostatic oil cooler, a 44 US gallon oil tank, a support structure and hood.
    • 1000 watt anti-freeze immersed heater with thermostat on PU-40 oil tank.

Options

5Options

  • PU-40 POWER UNIT (optional)

    • - The PU-40 Power unit includes a 40 hp electric motor (600 Volts, 60 Hertz, 3 phases, 80 Amps), an electric panel with 2 - 15 Amps/120 Volt outlets, a cut-off switch, a double gear pump, a thermostatic oil cooler, a 44 USgallon oil tank, a support structure and hood.
    - A secondary start/stop/accessories control box to be dealer installed in the operator station is also included, (with R - H - SD configurations only).

  • CAB (optional)

  • STANDARD EQUIPMENT

    - Insulated cab (38" x 52") with wiper, fan, roof light and 2 lights towards the front.

  • OPTIONAL EQUIPMENT

    - 4000 watts electric heater with thermostat and fan.
    - Air conditioning.
    - Cab front windshield protective grid.
    - Radio AM/FM/CD.