Find your serial number
To register your product or submit a warranty claim, you will need the serial number of your Rotobec equipment. This unique number helps our service team identify your unit and provide faster, more accurate support.
Ready to get started?
Scroll down to explore our products and easily find where the serial number is located on your equipment.
Choose your product here
Browse through our products and follow the diagram and instructions below to identify your equipment's serial number.
Elite 910 & 915 loaders
Elite Load N’ GO
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Still can’t find your ID Plate – What should I do?
If your product is not listed among our most popular models on the website, don’t worry – there are a few possible explanations:
- Your product may be a variation or equivalent model
Some Rotobec products share the same structural design and functionality. If your product isn’t named exactly as listed, it could be a variation or equivalent of a product already shown. In these cases, the ID plate location and general configuration are often the same or very similar. - Your unit may be a custom-built product
Rotobec frequently designs custom or modified equipment to suit specific applications. On custom builds, additional attachments or structural changes may result in the relocation of the ID plate to a more suitable or accessible surface. The ID plate should be in a location that is easily visible, accessible, and protected from potential damage during regular operation or maintenance. - Where to check if your model isn’t listed
Even if your exact model isn’t shown, we recommend checking:
– Inside or on the main grapple head structure
– On the outer upper jaw or central yoke
– At the loader base, on the pedestal column
– Near the rotator mount or pivot frame
Bunching Grapple
How to Locate the ID Plate on Rotobec Bunching Grapples.
The ID Plate is mounted inside the grapple head structure. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
- Maximum load
- Company reference
- Cylinder capacity
- Grapple weight
- Year of manufacture
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Butt’n top Grapple
How to Locate the ID Plate on Rotobec Butt’N Top Grapples
The ID Plate is located on the side of the grapple head.
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Clamshell Bucket
How to Locate the ID Plates on Rotobec Clamshell Bucket
The ID plates are mounted on top of the grapple head. (Refer to image for location)
The detailed callout in the diagram (Detail A) shows a close-up view of the ID plates position.
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Combination Grapple
How to Locate the ID Plate on Rotobec Combination Grapple
The ID Plate is mounted directly on the top of the grapple head. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Log Grapple
How to locate the ID Plate on a Rotobec Log Grapple
The ID Plate is mounted on the top of the grapple head. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Orange Peel Grapple
How to locate the ID Plate on a Rotobec Orange Peel Grapple
The ID plate is located inside the grapple head, beneath the rotator mounting plate. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Pipe handler Grapple
Rotobec Power Attachments (e.g., PH2036 series) feature multiple ID plates, each corresponding to a specific component of the assembly.
How to Locate the ID Plates on Rotobec Pipe handler Grapple
Rotator ID plate
Located on the rotator structure, accessible from above. (Refer to image for location)
May require removal of debris to read information.
Attachment ID Plate
Located on the grapple head. (Refer to image for location)
Easily accessible from ground level when standing in front of the attachment.
Jaw assembly ID Plate
On the side of the grapple jaw B. (Refer to image for location)
Note: May not be present on all models. Depends on configuration.
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Polygrab Grapple
How to Locate the ID Plate on Rotobec Polygrab Grapple
The ID Plate is mounted on top of the grapple head. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Pulpwood Grapple
How to Locate the ID Plates on Rotobec Pulpwood Grapple
The ID plates are installed directly on the top of the grapple head. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Rail Grapple
How to Locate the ID Plates on Rotobec Rail Grapple
The ID plate is mounted inside the grapple head structure. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
RPA Trash/Compaction Grapple
How to Locate the ID Plate on Rotobec RPA Trash/Compactopm Grapple
The ID plate for the RPA Trash Grapple is located inside the grapple head structure. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Sorting/demolition Grapples
How to Locate the ID Plate on Rotobec Sorting & Demolition Grapples
The ID Plate is located on the grapple head structure. (Refer to image for location)
You may need to look from above or slightly to the side, especially if the grapple is mounted.
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
- Maximum load
- Company reference
- Cylinder capacity
- Year of manufacture
- Grapple weight
- Model number and serial number
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Elite 910 & 915 Loaders
How to Locate the ID Plate on Rotobec Elite 910 & 915 Loaders
The ID Plate is installed on the loader’s pedestal column. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
A) Type : (Product type)
B) Model : (Product model)
C) S/N : (Serial Number)
D) P/N : (Part Number)
E) Weight : (excluding options and attachment)
F) Year : (Year of manufacture)
G) Manufacturer’s name
H) QR Code
I) Manufacturer’s name and address
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
Elite Load N’ GO
How to locate the ID Plate on Rotobec Elite Load N’ Go Loaders
The ID Plate is installed on the loader’s pedestal column. (Refer to image for location)
May require a flashlight to view clearly.
Look for a black rectangular metal tag with engraved information.
May require removal of debris to read information.
We suggest taking a picture of your ID plate when purchasing the grapple for future use.
The ID plate information includes :
A) Type : (Product type)
B) Model : (Product model)
C) S/N : (Serial Number)
D) P/N : (Part Number)
E) Weight : (excluding options and attachment)
F) Year : (Year of manufacture)
G) Manufacturer’s name
H) QR Code
I) Manufacturer’s name and address
Caution: Please refer to your equipment manual for safety requirements.
Have a question? Please consult our Frequently Asked Questions (FAQ) section.
If your product is not listed among our most popular models on the website, don’t worry – there are a few possible explanations:
- Your product may be a variation or equivalent model
Some Rotobec products share the same structural design and functionality. If your product isn’t named exactly as listed, it could be a variation or equivalent of a product already shown. In these cases, the ID plate location and general configuration are often the same or very similar. - Your unit may be a custom-built product
Rotobec frequently designs custom or modified equipment to suit specific applications. On custom builds, additional attachments or structural changes may result in the relocation of the ID plate to a more suitable or accessible surface. The ID plate should be in a location that is easily visible, accessible, and protected from potential damage during regular operation or maintenance. - Where to check if your model isn’t listed
Even if your exact model number isn’t shown, we recommend checking:Inside or on the main grapple head structure
On the outer upper jaw or central yoke
At the loader base, on the pedestal column
Near the rotator mount or pivot frameThese are standard ID plate locations across grapples, rotators, and Elite loaders. - Still can’t find it?
If you’re unable to locate the serial number:
Check the user manual: Serial number location is often illustrated.
Contact your dealer: They may have records or be able to assist you on site.
Reach out to Rotobec Support: Provide your product type and any details that could help identify it.
Your serial number helps us accurately identify your product, check its warranty status, and process warranty claims or service requests. It also ensures we provide you with the correct documentation, parts, and support specific to your equipment.
A Rotobec serial number is typically alphanumeric and engraved directly onto a metal surface or printed on a metal tag. Examples:
– OPG-22-17563
– LG-19-14236
Make sure to copy the number exactly as it appears, including any dashes or prefixes.
📩 Email Us
You can email us directly at: Email
📞 Need to Talk?
Give us a call at : 1 418 383-3002
Our service line is open Monday to Friday, 8 AM – 5 PM EST